"AIR REPAIR" is already in use in many places around the world and in New Zealand. Below are a number of applications where "AIR REPAIR" has solved a particular odour problem. Visit the "AIR REPAIR" PRODUCT RANGE to establish which product is ideally suited to solve your odour problem.For more information, please read our article on 'How Best to use AIR REPAIR'

Click on the images below for a more detailed view of each example.

[more detail]	Combined Transfer Station and Composting Plant At Ryde in Sydney
[more detail]	Environmentaly friendly, even the birds don't mind.
[more detail]	A major housing development planned on a disused gas works, soon found that to obtain town planning approval the problem of contaminated soil had to be solved. The solution, AIR REPAIR" F.S GOLD. [more detail]
[more detail]	PORTABLE TOILET DEODORISER This product has been on the market for two years with a major end user. Their requirements being for a very dense colour, good perfume with a very high bacteria work rate.
[more detail]	Milk Plant Waste being sprayed over pastures after the odours have been neutralised, by injecting "AIR REPAIR" into the effluent line. All liquid waste can be neutralised this way or by mixing "AIR REPAIR" with the effluent in a holding tank prior to being sprayed.
[more detail]	Using "AIR REPAIR" 7D-C for Ammonia control in a Chicken Broiler rearing shed The high pressure (1000p.s.i) fogging system spraying for 4 seconds every 10 minutes will reduce the Ammonia level from 60 ppm. down to 10 ppm. resulting in a far healthier bird. The high pressure fogging system is also used to provide the correct Humidity in the first 7 days, to ensure good leg bone structure to carry the bird through to its desired weight.  The same system can be used for Cooling - reducing the temperature in the sheds by 6 degrees in 10 minutes.
[more detail]	A High pressure fogging system using "AIR REPAIR" 7D-A to neutralise odours at a Garbage Transfer Station. The system operates on an adjustable twin timer spraying 30 seconds on with 2 minutes off.
[more detail]	High pressure fogging system fitted to a garbage compactor at a Land Fill site.
[more detail]	High pressure fogging nozzles providing an Air Curtain over garbage at various Land Fill sites using "AIR REPAIR" 7D-A.
[more detail]	Portable fogging system using a diesel powered high pressure pump. The system can have a 50 meter hose with high powered lance for spot neutralisation or spray booms for overall control.
[more detail]	High pressure fogging nozzles mounted around the Trickling Filters at a Sewage Works using "AIR REPAIR" FS. The system is very economical spraying only 30 seconds every 2 minutes.
[more detail]	Portable Air Curtain between the local town and the Sewage Ponds spraying "AIR REPAIR" F.S.
[more detail]	Large high pressure fogging system, installed over a very smelly water way in Bangkok. The cannel runs through the middle of a major hotel complex. By installing the system patrons can move from one complex to another without being bothered by the smell . The fog the system produces also gives a very good visual effect when looking at the water. Totally designed in stainless steel with stainless steel high pressure fogging nozzles, using "AIR REPAIR" 7D-A as the Odour Neutraliser.
[more detail]	Installation in Thailand, high pressure nozzles fitted over a sewage treatment tank .using "AIR REPAIR" F.S.
[more detail]	Compressed air atomising system in Hong Kong in a sewage screening plant spraying "AIR REPAIR" F.S.
[more detail]	Atomising system at the base of a sewage emissions stack spraying "AIR REPAIR" F.S. to neutrailse sewage odours.
[more detail]	Engineered pump and control unit, with automatic dilution control and complete timing control. The dilution ratio is usually between 100 to 200 : I depending on the situation.
[more detail]	Very small single nozzle system, used in one chamber pump stations.